Single Bolt Hubs

These hubs are one of the most widely used in the country. With a 58mm PCD and 50mm in length these are a very popular hub which is extremely strong and light, as a result they are equally at home on race or rental karts.

Available with 6mm or 8mm key and for 25mm, 30mm and 35mm axles.

Twin Bolt Hubs

Our twin bolt hubs are especially designed for rental karts. These also come with a 58mm PCD and are 65mm in length. Extremely strong and with the extra clamping bolt will remain rigid on the axle.

Available with 6mm or 8mm key for 30mm or 35mm axles.

Split Rear Hubs

The split hubs as the name suggests are made to fit our split wheels, but can also be used as a disc carrier.

Available with 6mm or 8mm key for 25mm, 30mm and 35mm axles.

Split Front Hubs

The front hubs are also designed for split wheels but are machined to carry 6003 bearings to be used on 17mm stub axles.

Rally Kart Hubs

With a PCD of 4” these hubs are for off road karts. Very strong and complete with two clamping bolts and come complete with studs and nuts.

Available with 6mm or 8mm key for 25mm or 30mm axles.

Carriers

Spider Type Disc Carrier

Extremely light carrier with a location diameter of 76mm. Available with 6mm or 8mm key and for 25mm, 30mm and 35mm axles.

Circular Type Disc Carrier

These are probably the strongest disc carriers on the market. Manufactured for rental karts these carriers come with a grub screw which clamps down on the axle key.

Available with 6mm or 8mm key for 30mm or 35mm axles.

Sprocket Carrier

Designed to take two rear sprockets at the same time if needed for quick gear changes.

Available with 6mm or 8mm key for 25mm or 30mm axles.

Quick Release Bearing Carriers

High Quality bearings carriers designed for race or rental karts for 30mm axles.

Come silver in colour but can be anodised in any colour you like subject to a minimum order.